ClamAV

ClamAV 0.98 – Update

There is a update for ClamAV available for download. The current version is 0.98. Upgrading is relatively easy and straight forward. All that needs to be done is remove the old version and install the new.

You can check the instructions on what to do here Upgrading ClamAV.

There is no need to reconfigure anything.

ClamAV 0.97.6 – update

There is a update for ClamAV available for download. The current version is 0.97.6. Upgrading is relatively easy and straight forward. All that needs to be done is remove the old version and install the new.

You can check the instructions on what to do here Upgrading ClamAV.

There is no need to reconfigure anything.

ClamAV after upgrading to Mountain Lion

For those of you who are using the ClamAV setup for virus checks, upgrading from Lion to Mountain Lion breaks ClamAV. For some reason, the config files and executables are left intact, but the necessary libraries are removed.

In order to fix this situation, simply reinstall from start. It is as simple as following the upgrade instructions. Upgrading ClamAV.

NOTE: The ClamAV documentation and upgrading instructions have been updated to reflect the new locations for the LaunchDaemon .plist files. If your previous install used

/System/Library/LaunchDaemons

You will have to move them to the new location.

/Library/LaunchDaemons

To do this, simply make sure they are not loaded.

sudo launchctl unload /Library/LaunchDaemons/com.diymacserver.freshclam.plist
sudo launchctl unload /Library/LaunchDaemons/com.diymacserver.clamav.plist

Now move the files.

sudo mv /System/Library/LaunchDaemons/com.diymacserver.clamav.plist /Library/LaunchDaemons/com.diymacserver.clamav.plist
sudo mv /System/Library/LaunchDaemons/com.diymacserver.freshclam.plist /Library/LaunchDaemons/com.diymacserver.freshclam.plist

ClamAV update – 0.97.5

There is a update for ClamAV available for download. The current version is 0.97.5. Upgrading is relatively easy and straight forward. All that needs to be done is remove the old version and install the new.

You can check the instructions on what to do here Upgrading ClamAV.

There is no need to reconfigure anything.

ClamAV update – 0.93.4

There is a update for ClamAV available for download. The current version is 0.97.4. Upgrading is relatively easy and straight forward. All that needs to be done is remove the old version and install the new.

You can check the instructions on what to do here Upgrading ClamAV.

There is no need to reconfigure anything.

For those that are interested. This version of ClamAV has on access scanning available under OS X 10.5 and later. For more information please check the ClamAV website here -> http://www.clamav.net/lang/en/2012/03/21/on-access-scanning-for-os-x/

Next Page »